1927 Track Plans Posted

I've just posted to the "TFRR Maps" page the links to a complete set of 1927 Tallulah Falls Railroad track plans lent to me by Mr. Edwards, which I had scanned and converted into PDF files.  These files are of high enough quality that they can be printed full size (approx. 2' x 5') by any commercial copy shop. 

Half Finished!

Progress in North Carolina!

During this long web silence I have made significant progress on the "North Carolina" section of the railroad, which is to run on the narrow strip of land that I am cultivating in between our driveway and the neighbor's fence. The gate at the end of the driveway is the state line back into Georgia.

The plan has been to cut back the natural slope enough to install a low block wall to produce a flat spot on which to lay track. Here's a photo of what it looked like in 2007 before any work was done.



































And here is an example of the general look we are going for, if you imagine that grassy lane to be a driveway:





















Here is a photo from a May 2010 post, which reveals if nothing else, that I have been working on this for quite a while now. This shows the opening volley - cutting back the embankment. That's the first 25 or so of 85 feet.

An unexpected benefit of this excavation was that the rain water draining out the neighbor's lawn came out of the hillside and ran down the edge of the driveway. Previously it was traveling under the driveway and appearing in the crawl space under the house!





















Phase Two was to rough out the length of the footer, get the basic width and depth in place. For this time we had a bowling alley-style trough to fall into if you parked too close to that edge of the driveway. Here it is in February 2011.






















Phase 3 was to square up the hole and get the depths right for a tiered level wall. I started at the gate end, where the plan has been to build a new wooden gate directly in front of the old hillbilly gate. Here is the view of the deeper hole for a 6" x 6" gatepost, as well as the first few feet of the squaring.


































Right before Christmas 2011 my brother-in-law Efrain came and built the forms for the concrete.
























Concrete at last! February 2011 the footer was poured - 3.5 yards from a truck with a 50 foot conveyor. The operator could have threaded a needle with that conveyor and snaked it right back to the end of the driveway.






































By March the forms are off. Let's lay some block!


































But before the block can be laid I needed to install the gate post. Here it is, as well as the frame of the left half of the gate.

Coal Dock Complete!

Here's a southbound view from the top of the new coal dock.

TFRR Postcards

I have been collecting postcards that have any depiction of the Tallulah Falls Railroad. Here they are in the order you would see these scenes along the line.





























































































































































































































































































































A tip of the hat to my Grandma Betty, who first excited my interest in postcards!

Coal Trestle at Cornelia Part 2

The general location of my model of the Cornelia coal trestle was established early on; just north of the oak tree on the way "out of town", generally following the positioning of this feature on the prototype. The effort to design the model began with stacking and rearranging lots of pieces of scrap wood on the worktable to try to get a sense of the geometry of the thing. A key factor was the need to keep the design very open so as to allow easy blowing of the leaves, acorns and other debris that pour like a woody waterfall off the giant oak tree overhead. A secondary goal was to repurpose a rugged looking piece of wood saved from the little laundry room that preceded the nice porch that we have now, which is the horizontal piece with the rusty nail holes on the middle level in the photo below:



















From there I carefully cut and attached everything together into the first version of the trestle, but upon mounting it on the line and attaching the 1/2" conduit to reveal the shape of the track I was dismayed to see how incredibly steep the approach would be!



















This seemed like it was sure be a source of trouble when trying to spot hopper cars atop the trestle, so it was back to the worktable to cut the legs down to a more reasonable height. By also moving the switch farther up the line I ended up with a much more gradual slope. Here's a long shot of the whole siding.























As an added bonus, the longer grade allowed me to build in a flat spot large enough to spot a car about halfway up the slope, shown here centered on the post on the left.






















I'm planning to model this spot as the Spencer ice factory, proceeding with the idea that northbound and southbound reefer cars would have been iced at this plant before proceeding up the TFRR or being spotted on the Southern Ry interchange track before moving on to the wider world. Perhaps additional research will reveal a photo of this operation! Here's a stock photo of a model icing platform in HO scale:






















In the meantime, the next elements to complete were the supports along the grade. This was extremely easy to do with the plastic conduit in place, as I only had to position the boards that would become the piers next to the conduit to see how tall each one needed to be, as well as the angle of slope atop each. These are spaced roughly 12" apart, allowing plenty of room to dispatch any leaves and other debris with the power blower.



















Now all that remains is to lay track, which will happen as soon as my back order of flex ties is finally fulfilled, and then to model the little hut that was positioned at the left end of the middle level, which I can only presume was a place for the wheelbarrow operators to get out of the weather when not working the coal pile.

Three Photos from Ebay!

I just acquired negatives for three TFRR photos from "Lemonade Squeeze", an online vendor.

The first is extremely exciting, as it provides the only clear view I have ever seen of the 10,000 gallon water tank that is indicated on those 1922 Sanborn maps. A 1938 photo on page 32 of the 2nd Edition of Brian Boyd's book shows the tank peeking up behind loco #75, but a 1943 photo on page 33 shows that the tank has been removed. The tank is a match for the tanks shown in undated photos of Joy and Mountain City. Other photos in Mr. Boyd's book indicate the water was delivered by a boring old water hose in later years.






















I'm not totally sure where this photo is located, but I think we are atop the deck girder bridge that crossed Tallulah Falls Lake looking east at the intersection between the two legs of Terrora Circle.



































Likewise, I am not totally sure about this photo, but my guess is that we have just come through the deep cut that is now filled by the modern, four-lane version of US-441 and are looking southbound, with "Old 441" and the Tallulah River on the right. The Joy depot and water tank should be in view on the track just ahead to the north. I think the cut behind us was the one decorated to look like a tunnel for Disney's "The Great Locomotive Chase".